DARWIN-S403PD181602M
Enterprise SONiC 16-Port Gigabit Switch with Two Marvell OCTEON TX2 CN9130 DPUs as Gateway and Server
-
Enterprise SONiC 16-Port Gigabit POE++ layer 3 switch.
-
Run OpenWRT/Ubuntu/Debian on the smallest L3 switch.
-
10Gps wirespeed with DPDK/VPP.
-
Extensive support for open-source software run on DPUs.
-
One unit integrating multiple functions: Switch, Router, Gateway, Server, etc.
Ultimate All-in-One Device: 16 Ports Gigabit Switch, Gateway, and Server Powered by SONiC, OpenWRT, and Ubuntu, Dual Marvell OCTEON TX2 CN9130 DPUs
The DARWIN-S403PD181602M is an advanced all-in-one solution combining switch, intelligent gateway, and server, tailored for small enterprises and SOHOs. Featuring the Marvell Prestera MV-DX2556 switch chip with a 72Gbps capacity and running the enterprise SONiC version, it supports comprehensive Layer 2 and Layer 3 functions, including OSPF, BGP, MLAG, and IPv6. Additionally, it integrates 1 or 2 Marvell OCTEON CN9130 DPU chips with 4-core ARMv8 Cortex-A72 processors and encryption engines, connected via 10G Ethernet on the backplane. This combination enables it to serve as both a networking and computing infrastructure, addressing diverse application needs and providing seamless, one-stop IT services.
Layer 2 Features
- 4K VLANs / Voice VLAN
- Multiple Spanning Tree Protocol
- QinQ
- Link Aggregation Control Protocol
- MLAG / VLAN Trunking
- Link Layer Discovery Protocol (LLDP)
- LLDP Enhancements for PoE
- Port Isolation
- IGMP Snooping
- BPDU Guard, BPDU Filter
- Loopback Detection
Layer 3 Features
- IPv4/v6 Dual Stack
- Policy Based Routing
- Resilient ECMP
- ARP-to-Host
- VRF
- Bi-Directional Forwarding Detection (BFD)
- IGMP v2/v3
- Route Map
- VRRP
- GRE
- Routing Protocols: OSPF v2/v3, BGP, MP-BGP
Management and Monitoring
- Asteria Campus Controller
- Industry Standard CLI
- Zero Touch Provisioning (ZTP)
- SNMP v1/v2/v3
- sFlow
- Port Mirroring
- Syslog
- Log Management
- PTP IEEE 1588v2 (TC and BC)
- Containerized Custom Tools
- BGP/BFD Operational Status
| Specifications | |
|
Hardware Specification
|
|
| Network interface | 16 x 1G RJ45 (port 1 to 8 support up to PoE++), 2 x 10G SFP |
| Switching capacity | 72Gbps |
| Chip model | Marvell Prestera |
| Forwarding rate | 53.5Mpps |
| Packet buffer | 3MB |
| Airflow | Front to Rear |
| Ambient operating temperature | 0 - 45 ℃ |
| Power over Ethernet PoE power budget | 150W (max.) |
| PoE standard | IEEE 802.3af / IEEE 802.3at / IEEE 802.3bt |
| DPU | |
| Configurable number of DPUs | 1 / 2 (optional) |
| Flash | 32GB eMMC |
| Mechanical | |
| Dimension (HxWxD) | 44 x 215 x 310mm |
| Rack Space | 1RU |
| Managed interface | 1 x USB2.0 |
| 1 x Console RJ45 | |
| PoE interface | 8 x PoE ++ |
| Input voltage range | 100 - 240V AC |
| Max. power consumption | 42W (Excluding PoE output), 18W for each DPU |
| Power Module | 1 Built-in Power |
| Fan Modules | 2 Built-in Fans |
| Ambient Relative humidity | 5% - 90% (non-condensing) |
| PoE power output per port | PoE++: 60W |
| Memory | 8G DDR4 |
| DPU model | Marvell Octeon, 4-core ARM64, 2.0GHz |
| Weight | 2.2KGs |