DARWIN-S200PD524804M
OVERVIEW
The DARWIN-S200PD524804M is a full gigabit managed PoE switch independently developed. It has 48*10/100/1000Base-T RJ45 ports and 4*100/1000Base-X SFP fiber slot ports. Port 1-48 can support IEEE802.3af/at standard PoE power supply. single port PoE power reaches 30W. As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP phone, building visual access control intercom, etc. through network cable, to meet the network environment that needs high-density PoE power supply.It is suitable for hotels, campuses, parks, shopping malls, scenic spots, hospitals, factory dormitory and small and medium-sized enterprise.
The DARWIN-S200PD524804M has L2+full Web management function, supports IPV4 management, static route full line rate forwarding, complete security protection mechanism, complete ACL/QoS policy and rich VLAN functions, and is easy to manage and maintain. Supports multiple network redundancy protocols STP/RSTP/MSTP (<50ms) to improve link backup and network reliability. When one-way network fails, communication can be quickly restored to ensure important Uninterrupted communication for applications. According to the actual application requirements, you can configure multiple application services such as PoE power management, port traffic control, VLAN division, and SNMP through the Web management mode.
FEATURE
Gigabit wire speed access, SFP port uplink
◇ Supports Gigabit Ethernet port and gigabit SFP uplink port combination, which enables users to flexibly build networking to meet the needs of various scenarios.
◇ Support non-blocking wire-speed forwarding.
◇ Support full-duplex based on IEEE802.3x and half-duplex based on backpressure.
Intelligent PoE power supply
◇ 48*10/100/1000Base-T RJ45 ports, meeting the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.
◇ IEEE802.3af/at PoE standard, without damaging non-PoE devices.
◇ Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.
◇ PoE network management, realize PoE port power allocation, priority setting, port power status viewing, time scheduling, etc.
Strong business processing capability
◇ IEEE802.1Q VLAN, flexible VLAN division, and QinQ configuration.
◇ QoS, Priority mode based on 802.1P, Port & DSCP, queue scheduling algorithm including Equ, SP, WRR & SP+WRR.
◇ ALC, filter data packet through configuring matching rules, processing operation & time permission, and provide flexible and safe access control.
◇ IGMP V1/V2 and IGMP Snooping.
◇ STP/RSTP/MSTP.
◇ Static and dynamic aggregation.
Security
◇ 802.1X authentication.
◇ Port isolation,Storm control.
◇ IP-MAC-VLAN-Port binding.
Stable and reliable
◇ Low power consumption, galvanized steel casing, The Fan active cooling.
◇ Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.
◇ CCC,CE, FCC, RoHS.
◇ The user-friendly pane can show the device status through the LED indicator of PWR, Link ,PoE.
Easy operation and maintenance management
◇ Web management, CLI command line (Console, Telnet), SNMP (V1/V2/V3).
◇ HTTPS, SSLV3, and SSHV1/V2.
◇ RMON, system log, LLDP, and port traffic statistics.
◇ CPU monitoring, memory monitoring, Ping test, and cable diagnose.
DIMENSION
| Interface Characteristics | |
| Fixed Port | 48*10/100/1000Base-T PoE ports (Data/Power) |
| 4*100/1000Base-X uplink SFP slot ports(Data) | |
| 1*RS232 console port(115200,N,8,1) | |
| Ethernet Port | Port 1-48 can support 10/100/1000BaseT(X) auto detect, full/half duplex MDI/MDI-X adaptive |
| Twisted Pair Transmission | 10BASE-T: Cat3,4,5 UTP(≤100 meter) |
| 100BASE-TX: Cat5 or later UTP(≤100 meter) | |
| 1000BASE-T: Cat5e or later UTP(≤100 meter) | |
| SFP Slot Port | Gigabit SFP optical fiber interface, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC) |
| Optical Cable/ Distance | Multi-mode:850nm / 0~500M (1.25G), Single-mode:1310nm / 0~40KM, 1550nm / 0~120KM. |
| Chip Parameter | |
| Network Management Type | L2+ |
| Network Protocol | IEEE802.3 10BASE-T, IEEE802.3i 10Base-T,IEEE802.3u 100Base-TX |
| IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X, IEEE802.3x | |
| Forwarding Mode | Store and Forward(Full Wire Speed) |
| Switching Capacity | 368Gbps (Non-blocking) |
| Forwarding | 77.38Mpps |
| Rate@64byte | |
| CPU | 750MHz |
| DRAM | 1G |
| FLASH | 256M |
| MAC | 16K |
| Buffer Memory | 12M |
| Jumbo Frame | 10K |
| LED Indicator | Power: PWR (Yellow), System: SYS (Yellow), Network: Link/Act (Yellow), PoE: PoE (Green), Fiber port: L/A(Green) |
| Reset Switch | Yes, One-button factory reset |
| PoE & Power Supply | |
| PoE Port | Port 1 to 48 |
| PoE Management | PoE working status |
| Delay start of power supply | |
| PoE output priority configuration | |
| Scheduling of PoE operation and time | |
| Total power limit of PoE power supply | |
| PoE output power allocation, off& af &at | |
| Power Supply Pin | Default 1/2 (+), 3/6 (-) |
| Max Power Per Port | 30W; IEEE802.3af/at |
| Total PWR / Input Voltage | 600W (AC100-240V) |
| Power Consumption | Standby<35W, Full Load<600W |
| Power Supply | Built-in power supply, AC 100~240V 50-60Hz 6.6A |
| Physical Parameter | |
| Operation TEMP / Humidity | -20~+55°C, 5%~90% RH Non condensing |
| Storage TEMP / Humidity | -40~+75°C, 5%~95% RH Non condensing |
| Dimension (L*W*H) | 440*290*44.5mm |
| Net /Gross Weight | <4.8kg / <5.5kg |
| Installation | Desktop, 19 inch 1U cabinet |
| Certification & Warranty | |
| Lightning Protection / Protection Level | Lightning protection: 4KV 8/20us; Protection level: IP30 |
| Certification | CCC;CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B; RoHS |
| Warranty | 3 years, lifelong maintenance. |
| Network Management Features | |
| Interface | IEEE802.3X (Full-duplex) |
| Port temperature protection setting | |
| Port green Ethernet Energy-saving setting | |
| Broadcast storm control based on port speed | |
| The speed limit of the message flow in the access port. | |
| The minimum particle size is 64Kbps. | |
| Layer 3 Features | IPV4 static route/default route, maximum 128 entries |
| L2+ network management, ARP protocol, maximum 1024 entries | |
| VLAN | VLAN based on MAC, QinQ configuration |
| Port configuration of Access, Trunk, Hybrid | |
| 4K VLAN based on port, IEEE802.1q,VLAN based on the protocol | |
| Port Aggregation | LACP, Static aggregation |
| Max 26 aggregation groups and 8 ports per group. | |
| Spanning Tree | STP (IEEE802.1d), RSTP (IEEE802.1w), MSTP (IEEE802.1s) |
| Multicast | MLD Snooping v1/v2,Multicast VLAN |
| IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out | |
| Port Mirroring | Bidirectional data mirroring based on port |
| QoS | Flow-based Rate Limiting |
| Flow-based Packet Filtering | |
| 8*Output queues of each port | |
| 802.1p/DSCP priority mapping | |
| Diff-Serv QoS,Priority Mark/Remark | |
| Queue Scheduling Algorithm (SP, WRR, SP+WRR) | |
| ACL | Port-based Issuing ACL,ACL based on port and VLAN |
| L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc. | |
| Security | IP-MAC-VLAN-Port binding |
| ARP inspection,Anti-DoS attack | |
| AAA & RADIUS,MAC learning limit | |
| Mac black holes,IP source protection | |
| IEEE802.1X & MAC address authentication | |
| Broadcast storm control,Backup for host datum | |
| SSH 2.0,SSL,Port isolation,ARP message speed limit | |
| User hierarchical management and password protection | |
| DHCP | DHCP Client,DHCP Snooping, DHCP Server,DHCP Relay |
| Management | One-key recovery |
| Cable Diagnose,LLDP | |
| Web Management (HTTPS) | |
| NTP,System work log,Ping Test | |
| CPU instant utilization status view | |
| Console/AUX Modem/Telnet/SSH2.0 CLI | |
| Download & Management on FTP, TFTP, Xmodem, SFTP,SNMP V1/V2C/V3 | |
| ONV NMS - smart network management system platform(LLDP+SNMP) | |
| System | Category 5 Ethernet network cable |
| Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later; | |
| TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in a network |