DARWIN-S077PС060400
OVERVIEW
The DARWIN-S077PС060400 is a non-standard PoE switch independently developed. It has 4*10/100M PoE ports and 2*10/100M uplink RJ45 ports. Port 1-4 can support 24V non-standard PoE. Single-port PoE power up to 24W. As a non-standard PoE power supply device, it must be connected to the corresponding non-standard electrical equipment (such as wireless bridge), or the corresponding non-standard separation line to convert, and then achieve the PoE power supply. It can supply power to various adaptable terminals through network cables to meet the demand for high density PoE power supply network environment. It is suitable for hotels, campuses, factory dormitories, and small and medium-sized enterprises to establish cost-effective networks.
Unmanaged model, plug and play, no configuration, easy to use.
FEATURE
10/100Mbps access, Dual RJ45 ports
◇ Provides 4*10/100M RJ45 ports and 2*10/100M RJ45 ports, which is more convenient for users to flexibly set up to meet the network requirements of various scenarios.
◇ Support non-blocking wire-speed forwarding.
◇ Support full-duplex based on IEEE802.3x and half-duplex based on backpressure.
Intelligent PoE power supply function
◇ 4*10/100Base-TX RJ45 ports can support 24V PoE power supply meeting the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.
◇ The maximum PoE output power of single port is 24W.
◇ It can quickly realize the power supply function of POE cable through the two ways of switching directly to non-standard electrical equipment or switch and non-standard separation line.
Easy to use
◇ Plug and play, no configuration, simple and convenient.
◇ The user-friendly panel, it can show the device status through the LED indicator of Power, L/A.
◇ With function switch, port 1-4 can support 10M/250m transmission and video surveillance mode when turned on.
Stable and reliable
◇ CCC,CE, FCC, RoHS.
◇ Low power consumption, galvanized steel casing, no fan.
◇ Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.
DIMENSION
| Interface | 4*10/100Base-TX PoE ports (Data/Power) |
| 2*10/100Base-TX uplink RJ45 Ports (Data) | |
| POE Port | Port 1-4 can support 24V PoE power supply. |
| Functional Switch | After opening, port 1-4 can support 10M/250m long distance transmission and CCTV |
| Note: When the switch status changes, the PoE switch must be restarted for the switch function to take effect. | |
| Network Protocol | IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; |
| IEEE802.3u 100Base-TX; | |
| IEEE802.3x | |
| PoE Standard | non-standard forced DC24V PoE power supply |
| Ethernet Port Feature | 10/100 BaseT(X) auto-detection, full/half-duplex MDI/MDI-X auto-sensing |
| Forwarding Mode | Store and Forward(Full Wire Speed) |
| Switching Capacity | 1.6Gbps (Non-blocking) |
| Forwarding Rate@64byte | 0.89Mpps |
| MAC | 1K |
| Buffer Memory | 768K |
| Twisted Pair Transmission | 10BASE-TX : Cat5 or later UTP(≤250 meter) |
| 100BASE-TX: Cat5 or later UTP(≤100 meter) | |
| Power Supply Pin | Default; only support 4/5(+), 7/8(-); |
| MAX / AVERAGE Power Per Port | 30W/15W |
| Total PWR / Input Voltage | 65W (AC100-240V) |
| Power Consumption | Standby: <3W;Full load: <60W |
| LED | Power Indicator : PWR (green);network indicator:lL/A (green); Multi-function indicator: EXTEND (green) |
| Power Supply | Built-in power supply AC 100~240V 50-60Hz 1A |
| Operation TEMP / Humidity | -20~+55°C;5%~90% RH Non-condensing |
| Storage TEMP / Humidity | -40~+75°C;5%~95% RH Non-condensing |
| Dimension | 142*115*40mm |
| Net /Gross Weight | <0.6kg / <1kg |
| Installation | desktop type ,wall mounted type |
| Lightning protection / protection level | Port Lightning Protection 4KV 8/20us; |
| Protection Level: IP30 | |
| Certification | CCC;CE mark, commercial;CE/LVD EN60950; FCC Part 15 Class B;RoHS; |
