Home / Industrial switches / DARWIN-S030ID441232M
DARWIN-S030ID441232M
Buy now in 1 click
Industrial switch DARWIN-S030ID441232M, 44 ports, managed L2+, 12 x POE 1000MB, 28 x Uplink SFP, 4 x Uplink 10G SFP, throughput 598Gb, weight 5200g, dimensions 440x291x44.5mm, power supply 130W
| Model | DARWIN-S030ID441232M | DARWIN-S030ID441232MW |
| Interface | 8*10/100/1000Base-T PoE ports (Data/Power) | |
| 4*10/100/1000Base-T RJ45 ports(Data) | ||
| 28*100/1000Base-X uplink SFP fiber slot ports (Data) | ||
| 4*1/10G uplink SFP+ fiber slot ports (Data) | ||
| 1*Console RS232 port (115200,N,8,1) | ||
| POE Port | Port 1 to port 8 | |
| Network Protocol | IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; | |
| IEEE802.3u 100Base-TX; | ||
| IEEE802.3ab 1000Base-T | ||
| IEEE802.3z 1000Base-X | ||
| IEEE802.3ae 10GBase-SR/LR | ||
| IEEE802.3x | ||
| PoE Standard | IEEE802.3af/at | |
| Ethernet Port Feature | 10/100/1000Base-T,Auto-sensing,Full/half duplex MDI/MDI-X self-adaption | |
| Fiber Port Feature | Gigabit SFP /10G SFP+ fiber interface, default matching optical modules(optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC) | |
| Forwarding Mode | Store and Forward(Full Wire Speed) | |
| Switching Capacity | 598Gbps (non-blocking) | |
| Forwarding Rate@64byte | 119.04Mpps | |
| MAC | 32K | |
| Buffer Memory | 32M | |
| Twisted Pair Transmission | 10BASE-T:Cat3,4,5 UTP(≤100 meter) ; | |
| 100BASE-TX: Cat5 or later UTP(≤100 meter) | ||
| 1000BASE-T:Cat5e or later UTP(≤100 meter) | ||
| Optical Fiber Cable | Multi-mode:850nm 0~300M(10G) ,850nm 0~500M (1.25G); Single-mode:1310nm 0~40KM,1550nm 0~120KM. | |
| Power Supply Pin | Default: 1/2(+),3/6(-) | |
| Max / Average Power Per Port | 30W/15.4W | 30W/30W |
| Total PWR / Input Voltage | 130W (AC100-240V) | 250W (AC100-240V) |
| Power Consumption | Standby<20W; Full Load<130W | Standby<25W;Full Load<250W |
| Power Supply | Built-in power supply, AC100~240V 50-60Hz 2.3A | Built-in power supply,AC100~240V 50-60Hz 4.1A |
| Power Input Interface | Dual input power interface, AC power supply priority, | |
| support anti-reverse protection, power-off automatic switching DC connection; 2 sets of DC48-57V input interface; | ||
| alarm switch ; 1 set of AC power input interface | ||
| LED Indicator | Power:PWR(yellow); system:SYS(yellow); network ;Link(yellow); PoE: PoE (green); Fiber port : L/A(green) | |
| Reset Button | Support one key to restore factory settings | |
| Heat Dissipation | Low noise; fan active cooling | |
| Operation TEMP/Humidity | -40~+80°C;5%~90% RH Non condensing | |
| Storage TEMP /Humidity | -40~+85°C;5%~95% RH Non condensing | |
| Dimension (L*W*H) | 440*290*44.5mm | |
| Net /Gross Weight | <4.0kg / <4.8kg | <4.5kg / <5.2kg |
| Installation | desktop ,19 inch 1U cabinet | |
| Lightning protection / protection level | Lightning protection: 6KV 8/20us;Protection level: IP30 | |
| IEC61000-4-2(ESD):±8kV contact discharge,±15kV air discharge | ||
| IEC61000-4-3(RS):10V/m(80~1000MHz) | ||
| IEC61000-4-4(EFT): power cable:±4kV; data cable:±2kV | ||
| IEC61000-4-5(Surge):power cable:CM±4kV/DM±2kV; data cable:±4kV | ||
| IEC61000-4-6(radio frequency transmission):10V(150kHz~80MHz) | ||
| IEC61000-4-8(power frequency magnetic field):100A/m;1000A/m ,1s to 3s | ||
| IEC61000-4-9(pulsed magnet field):1000A/m | ||
| IEC61000-4-10(damped oscillation):30A/m 1MHz | ||
| IEC61000-4-12/18(shockwave):CM 2.5kV,DM 1kV | ||
| IEC61000-4-16(common-mode transmission):30V; 300V,1s | ||
| FCC Part 15/CISPR22(EN55022):Class A | ||
| IEC61000-6-2(Common Industrial Standard) | ||
| Mechanical Properties | IEC60068-2-6 (anti vibration) | |
| IEC60068-2-27 (anti shock) | ||
| IEC60068-2-32 (free fall) | ||
| Certification | CCC; CE mark, commercial; CE/LVD EN60950; FCC Part 15 Class B; RoHS; | |
| Managed Series Feature | ||
| Interface | IEEE802.3X (Full-duplex) | |
| Broadcast storm control based on port speed | ||
| The speed limit of the message flow in the access port. The minimum particle size is 64Kbps. | ||
| Port temperature protection setting | ||
| Port green Ethernet Energy-saving setting | ||
| PoE Management | Total power limit of PoE power supply | |
| PoE output power allocation, off& af &at | ||
| PoE output priority configuration | ||
| PoE working status | ||
| Delay start of power supply | ||
| Scheduling of PoE operation and time | ||
| Layer 3 Function | Support L2+ managed function,IPV4/IPV6 management | |
| L3 soft routing forwarding, | ||
| Static route, Default route @ 128 pcs, APR @ 1024 pcs | ||
| VLAN | 4K VLAN based on port, IEEE802.1q | |
| VLAN based on the protocol | ||
| VLAN based on MAC | ||
| Voice VLAN, QinQ configuration | ||
| Port configuration of Access, Trunk, Hybrid | ||
| Port Aggregation | LACP, Static aggregation | |
| Max 22 aggregation groups and 8 ports per group. | ||
| Spanning Tree | STP (IEEE802.1d),RSTP (IEEE802.1w),MSTP (IEEE802.1s) | |
| Industrial Ring Network Protocol | G.8032 (ERPS),Recovery time less than 20ms | |
| 255 Ring at most, Max 254 devices per ring. | ||
| Multicast | IGMP Snooping v1/v2/v3, Max 1024 multicast groups, Fast log out | |
| MLD Snooping v1/v2,Multicast VLAN | ||
| Image | Bidirectional data mirroring based on port | |
| QoS | Diff-Serv QoS,Priority Mark/Remark | |
| 8*Output queues of each port | ||
| 802.1p/DSCP priority mapping | ||
| Queue Scheduling Algorithm (SP, WRR, SP+WRR) | ||
| Flow-based Packet Filtering | ||
| Flow-based Redirection | ||
| Flow-based Rate Limiting | ||
| ACL | L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc. Port-based Issuing ACL. | |
| ACL based on port and VLAN | ||
| Safety | User hierarchical management and password protection | |
| SSH 2.0,SSL,Port isolation,ARP message speed limit | ||
| Broadcast storm control,Backup for host datum | ||
| IEEE802.1X & MAC address authentication | ||
| Mac black holes,IP source protection | ||
| AAA & RADIUS,MAC learning limit | ||
| ARP inspection,Anti-DoS attack | ||
| IP-MAC-VLAN-Port binding | ||
| DHCP | DHCP Client,DHCP Snooping,DHCP Server,DHCP Relay | |
| Management And Maintenance | Console/AUX Modem/Telnet/SSH2.0 CLI | |
| Web Management (HTTPS) | ||
| Download & Management on FTP, TFTP, Xmodem, SFTP,SNMP V1/V2C/V3 | ||
| One-key recovery | ||
| NTP,System work log,Ping Test | ||
| Cable Diagnose,LLDP | ||
| CPU instant utilization status view | ||
| ONV NMS - Smart Network Management System Platform (LLDP+SNMP) | ||
| System | Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later; | |
| Category 5 Ethernet network cable | ||
| TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in a network | ||
