Home / Industrial switches / DARWIN-S010ID262204M


Buy now in 1 click
L2+ managed industrial PoE fiber switch with 24* 10/100/1000M RJ45 ports and 4*100/1000M uplink SFP fiber slot ports (including 2 set combo ports). Port 1-24 can support IEEE 802.3af/at PoE standard, Built-in 400W power supply.



The DARWIN-S010ID262204M series is L2+ full gigabit managed industrial PoE fiber switch independently developed. It has 24*10/100/1000Base-T RJ45 ports and 4*100/1000Base-X uplink SFP fiber slot ports. Port 1-24 can support IEEE 802.3af/at PoE standard. single port PoE power up to 30W and the maximum PoE output power of the host is 400W(at-600W). As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, web camera, VoIP phone, industrial sensor, visual intelligent building intercom through the network cable, and meet the network environment that needs high-density PoE power supply. It is suitable for hotels, campuses, parks, shopping malls, scenic spots, hospitals, banks, and small and medium-sized enterprises.


The DARWIN-S010ID262204M has the L2+ network management function, support IPV4/IPV6 management, static route full line-rate forwarding, security protection mechanism, ACL/QoS policy and rich VLAN functions, and is easy to manage and maintain. Support multiple network redundancy protocols STP/RSTP/MSTP (<50ms) and (ITU-T G.8032) ERPS(<20ms) to improve link backup and network reliability. When the one-way network fails, communication can be quickly restored to ensure important Uninterrupted communication for applications. According to the actual application requirements, you can configure multiple application services such as PoE power management, port traffic control, VLAN division, and SNMP through the Web network management mode.




Gigabit access, Gigabit SFP uplink

◇ A combination of Gigabit Ethernet port and Gigabit SFP port to meet the networking requirements of various scenarios.

◇ Support non-blocking wire speed forwarding

◇ Support full duplex based on IEEE802.3x and half duplex based on Backpressure


Intelligent PoE power supply

◇ 24*10/100/1000Base-T RJ45 ports can support POE power supply to meet the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.

◇ IEEE 802.3af/at PoE standard, without damaging non-PoE devices.

◇ Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.

◇ PoE network management, realize PoE port power allocation, priority setting, port power status viewing, time scheduling, etc.

Strong business processing capability

◇ IEEE802.1Q VLAN, flexible VLAN division, Voice VLAN, and QinQ configuration.

◇ QoS, Priority mode based on 802.1P, Port & DSCP, queue scheduling algorithm including EQU, SP, WRR & SP+WRR.

◇ ALC, filter data packet through configuring matching rules, processing operation & time permission, and provide flexible and safe access control.

◇ IGMP V1/V2 and IGMP Snooping.


◇ Static and dynamic aggregation.


◇ 802.1X authentication.

◇ Port isolation,Storm control.

◇ IP-MAC-VLAN-Port binding.

Stable and reliable

◇ Low power consumption, fan active cooling , galvanized steel casing.

◇ Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.


◇ The user-friendly panel, it can show the device status through the LED indicator of PWR, Link ,PoE.

Easy operation and maintenance management

◇ Web management, CLI command line (Console, Telnet), SNMP (V1/V2/V3).

◇ HTTPS, SSLV3, and SSHV1/V2.

◇ RMON, system log, LLDP, and port traffic statistics.

◇ CPU monitoring, memory monitoring, Ping test, and cable diagnose.





Model DARWIN-S010ID262204M DARWIN-S010ID262204MW
Interface 24*10/100/1000Base-T POE ports (Data /Power);
  4*100/1000Base-X uplink SFP ports (2*combo ports) (Data)
  1*RS232 Console port (115200,N,8,1)
POE Port Port 1 - 24  
Network Protocol IEEE802.3 10BASE-T,IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX
  IEEE802.3ab 1000Base-T,IEEE802.3z 1000Base-X,IEEE802.3x
PoE Standard IEEE802.3af/at  
Ethernet Port 10/100/1000Base-T,Auto-sensing,Full/half duplex MDI/MDI-X self-adaption
Fiber Port Feature Gigabit SFP optical fiber interface, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC)
Forwarding Mode Store and Forward (Full wire speed)
Switching Capacity 256Gbps (Non-blocking)  
Forwarding Rate@64byte 38.69Mpps  
MAC 8K  
Buffer Memory 8M  
Jumbo Frame 9.6K  
Twisted Pair Transmission 10BASE-T: Cat3,4,5 UTP(≤100 meter) ;
  100BASE-TX: Cat5 or later UTP(≤100 meter) ;
  1000BASE-X: Cat5e or later UTP(≤100 meter)
Optical Fiber Cable Multi Mode: 850nm 0-550M;Single Mode: 1310nm 0-40KM,1550nm 0-120KM.
Power Supply Pin Default: 1/2(+), 3/6(-);  
MAX / Average Power Per Port 30W/15.4W 30W/30W
Total PWR / Input Voltage 400W (AC100-240V) 600W (AC100-240V)
Power Consumption Standby:<18W; Full Load:<380W Standby:<22W; Full Load:<600W
Power Supply Built-in power supply, AC100~240V 50-60Hz 5A Built-in power supply, AC100~240V 50-60Hz 6.6A
Power Input Interface Dual input power interface, AC power supply priority,
  support anti-reverse protection, power-off automatic switching DC connection; alarm switch;
  2 sets of DC12-48V input interface;1 set of AC power input
LED Indicator Power : PWR(yellow); system: SYS(yellow) ; network:100M Link (yellow) 1000M Speed (green); SFP fiber port :L/A (green); POE : PoE (green);  
Reset Button Support one key to restore factory settings
Heat Dissipation Low noise; fan active cooling
Operation TEMP / Humidity -20~+55°C; 5%~90% RH Non-condensing
Storage TEMP / Humidity -40~+75°C; 5%~95% RH Non-condensing
Dimension 440*298*44.5mm    
Net /Gross Weight <4.5kg / <5.0kg <4.6kg / <5.3kg
Installation desktop ,19 inch 1U cabinet
Port lightning protection / protection level Lightning protection: 6KV 8/20us;Protection level: IP30
  IEC61000-4-2(ESD):±8kV contact discharge,±15kV air discharge
  IEC61000-4-4(EFT): power cable:±4kV; data cable:±2kV
  IEC61000-4-5(Surge):power cable:CM±4kV/DM±2kV; data cable:±4kV
  IEC61000-4-6(radio frequency transmission):10V(150kHz~80MHz)
  IEC61000-4-8(power frequency magnetic field):100A/m;1000A/m ,1s to 3s
  IEC61000-4-9(pulsed magnet field):1000A/m
  IEC61000-4-10(damped oscillation):30A/m  1MHz
  IEC61000-4-12/18(shockwave):CM 2.5kV,DM 1kV
  IEC61000-4-16(common-mode transmission):30V; 300V,1s
  FCC Part 15/CISPR22(EN55022):Class A
  IEC61000-6-2(Common Industrial Standard)
Mechanical Properties IEC60068-2-6 (anti vibration),IEC60068-2-27 (anti shock),IEC60068-2-32 (free fall)
Certification CCC;CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B; RoHS;
Network management features  
Interface IEEE802.3X (Full-duplex)  
  Broadcast storm control based on port speed
  The speed limit of the message flow in the access port. The minimum particle size is 64Kbps.
  Port temperature protection setting
  Port green Ethernet Energy-saving setting
PoE Management Total power limit of PoE power supply
  PoE output power allocation, off& af &at
  PoE output priority configuration
  PoE working status,Delay start of power supply
  Scheduling of PoE operation and time
Layer 3 Features L2+ Network management,IPV4/IPV6 management,L3 soft routing forwarding,
  Static route, Default route @ 128 pcs, APR @ 1024 pcs
VLAN 4K VLAN based on port, IEEE802.1q
  VLAN based on the protocol,VLAN based on MAC
  Voice VLAN, QinQ configuration
  Port configuration of Access, Trunk, Hybrid
Port Aggregation LACP, Static aggregation,Max 13 aggregation groups and 8 ports per group.
Spanning Tree STP (IEEE802.1d),RSTP (IEEE802.1w),MSTP (IEEE802.1s)
Industrial Ring Network Protocol G.8032 (ERPS),Recovery time less than 20ms, 255 Ring at most, Max 1024 devices per ring.
Multicast IGMP Snooping v1/v2/v3, Max 1024 multicast groups, Fast log out
  MLD Snooping v1/v2,Multicast VLAN
Port Mirroring Bidirectional data mirroring based on port
QoS Diff-Serv QoS,Priority Mark/Remark
  8*Output queues of each port
  802.1p/DSCP priority mapping
  Queue Scheduling Algorithm (SP, WRR, SP+WRR)
  Flow-based Packet Filtering
  Flow-based Redirection  
  Flow-based Rate Limiting  
ACL L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc. Port-based Issuing ACL.ACL based on port and VLAN
Security User hierarchical management and password protection
  SSH 2.0,SSL,Port isolation,ARP message speed limit
  Broadcast storm control,Backup for host datum
  IEEE802.1X & MAC address authentication
  Mac black holes,IP source protection
  AAA & RADIUS,MAC learning limit
  ARP inspection,Anti-DoS attack
  IP-MAC-VLAN-Port binding
DHCP DHCP Client,DHCP Snooping,DHCP Server,DHCP Relay
Management Console/AUX Modem/Telnet/SSH2.0 CLI
  Web Management (HTTPS)  
  Download & Management on FTP, TFTP, Xmodem, SFTP,SNMP V1/V2C/V3
  One-key recovery,NTP,System work log,Ping Test
  Cable Diagnose,LLDP,CPU instant utilization status view
  ONV NMS - Smart Network Management System Platform (LLDP+SNMP)
System Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later;
  Category 5 Ethernet network cable
  TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in a network