DARWIN-S007ID160804M
L2+ managed industrial PoE fiber switch with 12*10/100/1000M RJ45 ports and 4*1/10G uplink SFP+ slot ports, Port 1-8 can support IEEE802.3af/at PoE. Support dual DC power supply input and DIN rail mounting.
OVERVIEW
The DARWIN-S007ID160804M is a 10G uplink managed industrial PoE fiber switch independently developed. it has 12*10/100/1000Base-T RJ45 ports and 4*1/10G SFP+ fiber slot ports. Port 1-8 can support IEEE 802.3af/at standard POE, single port POE power up to 30W, and the maximum POE output power of the whole machine is 120W(at-240W). As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, web camera, VoIP phone, industrial sensor through network cable, and meet the network environment that needs high-density PoE power supply. It is suitable for intelligent transportation, rail transit, electric power, mining, metallurgy and green energy. Industrial scenes such as construction set up a cost-effective and stable communication network.
The DARWIN-S007ID160804M has L2+ full network management, supports IPV4/IPV6 management, static route full line rate forwarding, security protection mechanism, ACL/QoS policy and VLAN, and is easy to manage and maintain. It has the leading ring network technology, supporting a variety of industrial redundant redundant ring network protocol, any port can be a ring, support chain type, star type, double star type, ring type, tangent ring, intersecting ring, coupling ring, ring network 20ms self healing. It has high reliability, security and manageability, ensure reliable transmission of key data, support remote management, and can manage cluster management with network management platform. DARWIN-S007ID160804M industrial series products fully follow industrial product design and material. The casing uses aluminum alloy to enhance heat dissipation. It has excellent industrial field environment adaptability (including mechanical stability, climate and environment adaptability, electromagnetic environment adaptability, etc.), Protection level is IP40, support dual power supply, low power consumption no fan heat dissipation technology, MTBF average fault free working time can reach 35 years, 5 years warranty.
| Interface | 8*10/100/1000M PoE ports (Data/Power); |
| 4*10/100/1000M RJ45 ports; | |
| 4*1/10G uplink SFP+ fiber slot ports (Data); | |
| 1*Console RS232 port (115200,N,8,1); | |
| 2 sets of V+, V- redundant DC power interface (6 Pin Phoenix terminal) | |
| PoE Port | Port 1-8 can support POE @ IEEE802.3af/at |
| Network Protocol | IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; |
| IEEE802.3u 100Base-TX; | |
| IEEE802.3ab 1000Base-T; | |
| IEEE802.3z 1000Base-X; | |
| IEEE802.3ae 10GBase-LR/SR | |
| IEEE802.3x | |
| PoE Standard | IEEE802.3af/at |
| Ethernet Port | Port 1-12 can support 10/100/1000BaseT (X) automatic detection, full / half duplex MDI/MDI-X adaptive |
| SFP Port | 10G SFP+ optical fiber interface, default matching optical modules, need to buy separately, (optional order mode / multi-mode, single fiber / double fiber optical module. |
| Forwarding Mode | Store and Forward (full wire speed) |
| Switching Capacity | 368Gbps |
| Forwarding Rate@64byte | 77.38Mpps |
| MAC | 24K |
| Buffer Memory | 24M |
| Twisted Pair Transmission | 10BASE-T: Cat3,4,5 UTP(≤100 meter) |
| 100BASE-TX: Cat5 or later UTP(≤100 meter) | |
| 1000BASE-T: Cat5e or later UTP(≤100 meter) | |
| Optical Cable | Multi mode: 850nm 0 ~ 550M,single mode: 1310nm 0 ~ 40KM, 1550nm 0 ~ 120KM. |
| Power Supply Pin | Only support 1/2 (+), 3/6 (-) |
| MAX / Average Power Per Port | 30W/15.4W |
| Total PWR / Input Voltage | 120W (48-57VDC) |
| Power Consumption | Standby:<15W; Full load:120W |
| LED | Power indicator : PWR (green); System indicator :(green); Network indicator: Link (yellow); SFP indicator: L/A (green); PoE indicator: PoE (green) |
| Power Supply | No, see accessories information table to buy and use |
| Operation TEMP / Humidity | -40~+80°C;5%~90% RH Non condensing |
| Storage TEMP / Humidity | -40~+85°C;5%~95% RH Non condensing |
| Dimension | 166*149*74.5mm |
| Net /Gross Weight | <1.9kg / <2.4kg |
| Lightning protection / protection level | Lightning protection: 6KV 8/20us;Protection level: IP40 |
| IEC61000-4-2(ESD):±8kV contact discharge,±15kV air discharge | |
| IEC61000-4-3(RS):10V/m(80~1000MHz) | |
| IEC61000-4-4(EFT): power cable:±4kV; data cable:±2kV | |
| IEC61000-4-5(Surge):power cable:CM±4kV/DM±2kV; data cable:±4kV | |
| IEC61000-4-6(radio frequency transmission):10V(150kHz~80MHz) | |
| IEC61000-4-8(power frequency magnetic field):100A/m;1000A/m ,1s to 3s | |
| IEC61000-4-9(pulsed magnet field):1000A/m | |
| IEC61000-4-10(damped oscillation):30A/m 1MHz | |
| IEC61000-4-12/18(shockwave):CM 2.5kV,DM 1kV | |
| IEC61000-4-16(common-mode transmission):30V; 300V,1s | |
| FCC Part 15/CISPR22(EN55022):Class A | |
| IEC61000-6-2(Common Industrial Standard) | |
| Mechanical Properties | IEC60068-2-6 (anti vibration) |
| IEC60068-2-27 (anti shock) | |
| IEC60068-2-32 (free fall) | |
| Certification | CCC;CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B; RoHS; |
| Port | Support IEEE802.3x flow control (full duplex) |
| Support for broadcast storm suppression based on port rate | |
| support speed limit for incoming and offline message traffic, with a minimum particle size of 64Kbps. | |
| Support port temperature protection settings | |
| Support port EEE green Ethernet energy saving configuration | |
| PoE Management | Support total power limit configuration for POE power supply |
| Support PoE output power allocation per port, close / start af/at | |
| Support PoE output priority configuration per port | |
| Support PoE work status per port display | |
| Support power delay start | |
| Support PoE work and time scheduling | |
| Layer 3 Function | Support L2+ Layer 3 soft routing forwarding, non-linear speed |
| Support static routing / default routing 128, 1024 ARP software forwarding | |
| VLAN | Support port based VLAN (4K), IEEE802.1q |
| Support protocol based VLAN | |
| Support Access, Trunk, Hybrid three types of port configuration | |
| Support QinQ configuration | |
| Port Aggregation | Support LACP |
| Support static polymerization | |
| Support the largest 8 aggregation groups, each aggregation group supports 8 ports. | |
| Spanning Tree | Support STP(IEEE802.1d) |
| Support STPRSTP (IEEE802.1w) | |
| Support STP MSTP (IEEE802.1s) | |
| Industrial Ring Network Protocol | Support G.8032 (ERPS), support 255 loops at most, and supports 1024 devices per ring. |
| The self healing time of the ring network is less than 20ms | |
| Multicast | Support IGMP Snooping V1/V2 and support 1024 multicast groups at most. |
| Support the user's quick departure mechanism | |
| Support MLD Snooping V1/V2 | |
| Support multicast VLAN | |
| Mirror | Bi-directional traffic mirroring supporting the basic port |
| QoS | Support Diff-Serv QoS |
| Each port supports 8 output queues | |
| Support 802.1p/DSCP priority mapping | |
| Support queue scheduling mechanism (SP, WRR, SP+WRR) | |
| Support priority tag Mark/Remark | |
| Support stream based packet filtering | |
| Support for stream based redirection | |
| Support flow based speed limit | |
| ACL | Support L2 to L4 packet filtering function, can match the first 80 bytes of the message, provide based on the source MAC address, destination MAC address, source IP address, destination IP address, IP protocol type, TCP/UDP port, TCP/UDP port range, VLAN and other definition ACL. |
| Support ACL based on port and VLAN | |
| Safety Characteristics | Support user grading management and password protection |
| Support IEEE802.1X authentication / centralized MAC address authentication | |
| Support AAA&RADIUS authentication | |
| Support the number of MAC address learning restrictions | |
| Support MAC address black hole | |
| Support SSH 2 to provide secure passwords for user login. | |
| Support SSL to ensure data transmission security | |
| Support port isolation | |
| Support the speed limit function of ARP message | |
| Support IP source address protection | |
| Support ARP intrusion detection function | |
| Support against DoS attacks | |
| Support port broadcast message suppression | |
| Support host data backup mechanism | |
| Binding capabilities of IP+MAC+VLAN+ ports | |
| DHCP | Support DHCP Client |
| Support DHCP Snooping | |
| Suport DHCP Serve | |
| Suport DHCP Relay | |
| Management And Maintenance | Support Console/AUX Modem/Telnet/SSH2.0 CLI command line configuration |
| Support WEB network management (HTTPS) | |
| Support FTP, TFTP, Xmodem, SFTP file download management | |
| Support SNMP V1/V2C/V3 | |
| Support one bond reduction | |
| Support NTP clock | |
| Support system work log | |
| Support Ping detection | |
| Support cable state detection | |
| Support CPU instant utilization status view | |
| Support link layer discovery protocol LLDP | |
| Support ONV NMS intelligent management center | |
| System Requirements | Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later; |
| Cat5e or later Ethernet cable; | |
| TCP/ IP, network adapter and network operating system (Microsoft Windows, Linux or Mac OS X) installed on on every computer in the network. |
